Olivetti d-Color MF2001 Service Manual

Also see for d-Color MF2001: Sales guide Installation manual

2KZ/2K01-3-95U942 Setting of deflection for feeding from DPDescriptionAdjusts the deflection generated when the document processor is used.PurposeUse this mode if an original non-feed jam, oblique feed or wrinkling of original occurs when thedocument processor is used.Setting1. Press the start key.2. Press the system menu key.3. Place an original on the DP and press the start key to make a test copy.4. Press the system menu key.5. Select the item to be adjusted.6. Change the setting value using the cursor left/right keys or numeric keys.l* : The greater the value, the larger the deflection; the smaller the value, the smaller thedeflection.If an original non-feed jam or oblique feed occurs, increase the setting value. If wrinklingof original occurs, decrease the value.7. Press the start key. The value is set.CompletionPress the stop key. The screen for selecting a maintenance item No. is displayed.U984 Checking the developing unit numberDescriptionDisplays the developing unit number.PurposeTo check the developing unit number.Method1. Press the start key. The developing unit number for each color is displayed.CompletionPress the stop key. The screen for selecting a maintenance item No. is displayed.Item No. DescriptionDisplay Description SettingrangeInitialsettingChange invalue per stepFront Deflection of DP paper feedmotor (DPPFM)-50 to 50 0 0.119 mmBack Deflection of DP switchbackmotor (DPSBM)-50 to 50 0 0.119 mmDisplay DescriptionC Cyan developing unit numberM Magenta developing unit numberY Yellow developing unit numberK Black developing unit numberY113010-4 Sevice Manual