System Settings8-4 OPERATION GUIDE1 Access 110. Eco Fuser.If you are unsure how to use this route map refer to Accessing Menu Items onpage xx.2 Press W or X to select On or Off. Press [OK]. The display returns to the readyscreen.Copy SetupChanging Function DefaultsFor functions that you use often, changing the default value to the setting willminimize the time required to make that setting each time the corresponding functionis used. The following table shows the functions for which the default values can bechanged and their available settings. The factory default settings are shown with anasterisk (*).1 Access 2. Copy Setup.If you are unsure how to use this route map refer to Accessing Menu Items onpage xx.2 Press W or X to select the default setting that you want to change and press[OK]. The screen for the selected default setting is displayed.3 Press W or X to select the new default setting and press [OK]. The displayreturns to the ready screen.[Menu]W or X1. Common Setup[OK]W or X110. Eco Fuser[OK]Function Available Settings Reference21. Def Copy Mode * TextPhotoText + Photopage 4-122. Def Exposure 1 to 7(Default setting is 4)page 4-123. Def Zoom * Original(100%)Custom(25%-400%)Fit To PaperLTR To STMA4 To A5STM To LTRA5 To A4page 4-424. Def Collate*OnOffpage 4-525. Def EcoPrint*OnOffpage 4-6[Menu]W or X2. Copy Setup[OK]