Olivetti d-Copia 284MF Service Manual

Also see for d-Copia 284MF: Quick installation guide Quick installation guide Operation guide Operation guide

2JN1-3-84(11) Restarting the SystemRestarting the System1. Select [Restart] using the cursor up/down keys.2. Press the OK key.3. Select [Yes].The machine is restarted.(12) Network SetupLAN Interface Setup1. Select [Network Setting] using the cursor up/downkeys.2. Press the OK key.3. Select [LAN Interface] using the cursor up/downkeys.4. Press the OK key.5. Select the desired LAN interface.6. Press the OK key.TCP/IP (IPv4) Setup1. Select [Network Setting] using the cursor up/downkeys.2. Press the OK key.3. Select [TCP/IP Settings] using the cursor up/downkeys.4. Press the OK key.5. Select [TCP/IP] using the cursor up/down keys.6. Press the OK key.7. Select [On] and press the OK key.8. Select [IPv4 Setting] using the cursor up/downkeys.9. Press the OK key.10. Select [DHCP] using the cursor up/down keys.11. Press the OK key.12. Select [Off] and press the OK key.13. Select [Bonjour] using the cursor up/down keys.14. Press the OK key.15. Select [Off] and press the OK key.16. Select [IP Address] using the cursor up/down keys.17. Press the OK key.18. Enter the IP address and press the OK key.19. Select [Subnet Mask] using the cursor up/downkeys.20. Press the OK key.21. Enter the Subnet Mask and press the OK key.22. Select [Default Gateway] using the cursor up/downkeys.23. Press the OK key.24. Enter the Default Gateway and press the OK key.TCP/IP (IPv6) Setup1. Select [Network Setting] using the cursor up/downkeys.2. Press the OK key.3. Select [TCP/IP Settings] using the cursor up/downkeys.4. Press the OK key.5. Select [IPv6 Setting] using the cursor up/downkeys.6. Press the OK key.7. Select [On] or [Off].8. Press the OK key.NetWare Setup1. Select [Network Setting] using the cursor up/downkeys.2. Press the OK key.3. Select [NetWare] using the cursor up/down keys.4. Press the OK key.5. Select [On] or [Off].6. Press the OK key.7. Select the desired frame type.8. Press the OK key.AppleTalk Setup1. Select [Network Setting] using the cursor up/downkeys.2. Press the OK key.3. Select [AppleTalk] using the cursor up/down keys.4. Press the OK key.5. Select [On] or [Off].6. Press the OK key.WSD Scan Setup1. Select [Network Setting] using the cursor up/downkeys.2. Press the OK key.3. Select [WSD-SCAN] using the cursor up/downkeys.4. Press the OK key.5. Select [On] or [Off].6. Press the OK key.WSD Print Setup1. Select [Network Setting] using the cursor up/downkeys.2. Press the OK key.3. Select [WSD-PRINT] using the cursor up/downkeys.4. Press the OK key.5. Select [On] or [Off].6. Press the OK key.Service Manual Y111030-4