Olivetti d-Copia 284MF Service Manual

Also see for d-Copia 284MF: Quick installation guide Quick installation guide Operation guide Operation guide

2JN1-3-49U603 Setting user data 1DescriptionMakes user settings to enable the use of the machine as a fax.PurposeTo be run after installation of the facsimile kit if necessary.Method1. Press the start key.2. Select [LINE TYPE]. The current setting is displayed in reverse.3. Select the setting using the cursor up/down keys.Initial setting: DTMF4. Press the start key. The value is set.CompletionPress the stop key. The screen for selecting a maintenance item No. is displayed.U604 Setting user data 2DescriptionMakes user settings to enable the use of the machine as a fax.PurposeUse this if the user wishes to adjust the number of rings that occur before the unit switches into fax receivingmode when fax/telephone auto-select is enabled.Method1. Press the start key. The current setting is displayed.2. Select [RINGS(F/P)#].3. Change the setting using the cursor left/right keys or numeric keys.If you set this to 0, the unit will start fax reception without any ringing.4. Press the start key. The value is set.CompletionPress the stop key. The screen for selecting a maintenance item No. is displayed.U605 Clearing dataDescriptionInitializes data related to the fax transmission such as transmission history.PurposeTo clear the transmission history.Method1. Press the start key.2. Select [CLEAR COM.REC.].3. Press the start key. Initialization processing starts. When processing is finished, the screen for selectinga maintenance item No. is displayed.CompletionPress the stop key. The screen for selecting a maintenance item No. is displayed.Maintenanceitem No. DescriptionDisplay DescriptionDTMF DTMF10PPS 10 PPS20PPS 20 PPSDescription Setting range Initial settingNumber of fax/telephone rings 0 to 15 2 (120 V)/1 (220-240 V)Y111030-4 Service Manual