Olivetti d-Copia 284MF Service Manual

Also see for d-Copia 284MF: Quick installation guide Quick installation guide Operation guide Operation guide

2JN1-4-311-4-7 Send error code(1) Scan to SMB error codesCode DisplayRemarksCauses Check procedures/corrective measures1102 Error: User/Password orShared Name/Folder NameDomain name is not entered. Enter the user name with the form of either[Domain¥User], [Domain/User] or[Domain@User].Assign disable user/pass-word.Enter the correct user name/password.Assign the user who is notallowed to access to folder.Enter correct user name/password.Check the access limit of destination folder.Assign disable shared name. Enter the correct shared name.Check if the prohibited letters below areused to shared name.@( )!&#$%^~[ ]`Host name error. Check if the prohibited letters are used toshared name.“&’( )|`;<>1103 Error: Pathname or FileNameDomain name is not enter Enter the user name with the form of either[Domain¥User], [Domain/User] or[Domain@User].Connect to the folder which isnot permitted for reference/writing.Enter correct user name/password.Check the access limit of destination folder.Assign disable folder path. Enter correct folder path.1105 Error: Not support protocol SMB Protocol is set to OFF. Check ON in the [Scanner]-[SMB] screen inCOMMAND CENTER.2101 Error: Can not connect Enter the disable host name/IP address.Enter the correct host name or IP address.Assign the wrong port num-ber.Enter the correct port number.Network is not connected. Check if the server is operating properly.Check the network connection (cable. net-work condition within LAN, etc.).2103 Error: Response wait withtimeoutThe server is unable to com-municate.Check if the server is operating properly.2201 Error: Network transfer Error occurs on the network. Check the network connection (cable. net-work condition within LAN, etc.).2203 Error: Response wait withtimeoutResponse is not returnedfrom the server above speci-fied time.Check the network connection (cable. net-work condition within LAN, etc.).9181 Error: Page max count over The number of pages of asend file exceeded 999pages.Set the number of pages as 999 or less.Y111030-4 Service Manual