12 ENInstalling the suppliedcomputer software (ib)After checking the system requirements, followthe instructions below to connect the camera toa computer and install the supplied computersoftware (ib).System requirementsWindows XP (Service Pack 2 or later)/Windows Vista/Windows 7Connecting the cameraMulti-connectorUSB cable (supplied)Computer (on and running)Indicator lampFor information on using the computersoftware (ib), see the software’s online help.1 Insert the supplied CD in a CD-ROMdrive.A setup screen will appear on the computermonitor.If the setup window is not displayed,select “My Computer” (Windows XP) or“Computer” (Windows Vista/Windows 7)from the start menu. Double-click theicon for the CD-ROM drive to open thesetup CD window and then double-click“CameraInitialSetup.exe”.●2 Connect the camera to thecomputer.3 Follow the on-screen instructionson your computer.Operation guideOperation guides displayed at the bottom of thescreen indicate that the m button, H button,or zoom buttons should be used.MENUOKSEL. IMAGEERASE/CANCELOperation guideOKSET12FINE ZOOM OFFAF MODE FACE/iESPCOMPRESSION NORMALMENU OKSETEXITR OFFICON GUIDE ONSetting the date, time andtime zoneThe date and time set here are saved to imagefi le names, date prints, and other data.1 Press the n button to turn onthe camera.The date and time setting screen is displayedwhen the date and time are not set.X-- -- -- --:.. Y/M/DMENUY M D TIMECANCEL--------Date and time setting screen●