31ENFor information on using the menus, see “Using the Menu” (p. 4).When erasing pictures in the internalmemory, do not insert a card into thecamera.When erasing pictures from the card, inserta card into the camera in advance.To erase all images [ALL ERASE]1 Use FG to select [ALL ERASE], andpress the H button.2 Use FG to select [YES], and press theH button.To individually select and eraseimages [SEL. IMAGE]1 Use FG to select [SEL. IMAGE], andpress the H button.2 Use HI to select the image to beerased, and press the H button to add aR mark to the image.Press the W zoom button to display an indexview. Images can be quickly selected usingFGHI. Press the T button to return to thesingle frame display.MENUOKSEL. IMAGEERASE/CANCELR mark3 Repeat Step 2 to select the images to beerased, and then press the m buttonto erase the selected images.4 Use FG to select [YES], and press theH button.The images with a R mark are erased.Saving print settings to the image data[PRINT ORDER]q (Playback menu) X PRINT ORDER“Print Reservations (DPOF)” (p. 40)Print reservation can be set only for stillimages that are recorded to the card.●●Protecting images [0]q (Playback menu) X 0Protected images cannot be erased by[ERASE] (p. 18, 30), [SEL. IMAGE], or [ALLERASE] (p. 30), but all images are erasedby [MEMORY FORMAT]/[FORMAT] (p. 32).1 Use HI to select an image.2 Press the H button.Press the H button again to cancel thesettings.3 If necessary, repeat Steps 1 and 2to protect other images, and press them button.Rotating images [y]q (Playback menu) X y1 Use HI to select an image.2 Press the H button to rotate the image.3 If necessary, repeat Steps 1 and 2 tomake settings for other images, and pressthe m button.The new picture orientations will be savedeven after the power is turned off.Adding sound to still images [R]q (Playback menu) X R1 Use HI to select an image.2 Aim the microphone toward the soundsource.Microphone3 Press the H button.Recording starts.●●