DMTA-10045-01EN, Rev. E, August 2016Control Functions 103• TOP: controls the top of the BOX alarm threshold. To change the setting, press theB key, and then rotate the knob until the threshold is in the desired position.• BOTTOM: controls the bottom of the BOX alarm threshold. To change the setting,press the C key, and then rotate the knob until the threshold is in the desiredposition.• LEFT: controls the left side of the BOX alarm threshold. To change the setting,press the D key, and then rotate the knob until the threshold is in the desiredposition.• RIGHT: controls the right side of the BOX alarm threshold. To change the setting,press the E key, and then rotate the knob until the threshold is in the desiredposition.5.3.13 MIA Mode — Alarm MenuThe following parameters can be adjusted in the MIA mode ALARM menu:• DEFINE menu:— SCAN ALM (scan alarm)— XY ALM 1 (XY alarm 1)— XY ALM 2 (XY alarm 2)— DWELL— HORN• XY ALM 1 (XY alarm 1) menu:— SHAPE• XY ALM 2 (XY alarm 2) menu:— SHAPEFor XY ALM and SHAPE parameter adjustment details, see “PC Swept Mode —ALARM Menu” on page 96. For DWELL and HORN details, see “PC RF Mode —ALARM Menu in RF RUN” on page 93. Parameter descriptions are based on thepresumption that the BondMaster 600 is set to MIA mode and the ALARM menu key( ) has been pressed.
