DMTA-10045-01EN, Rev. E, August 2016Specifications 211A.2 Input/Output SpecificationsTable 9 on page 212 provides the specifications for the input and output signals.Display Size (width × height,diagonal)117.4 mm × 88.7 mm, 146.3 mm (4.62 in. × 3.49 in.,5.76 in.)Resolution 640 × 480 pixels (full VGA)Number of colors 256Type Full VGA (640 × 480 pixels) color transflective LCD(liquid crystal display)Viewing angles Horizontal: −80° to 80°Vertical: −80° to 80°Screen modes Normal or full screenGrid and display tools Choice of 5 grids (OFF, 10 × 10, FINE, COARSE,and WEB) and user-selected crosshairs available onXY displaysModes (all possible) Available display modes depend on theBondMaster 600 model and selected operatingmode. Choice of RF view (time-based waveformfeaturing raw waveform named RF, or signalamplitude envelope named IMPULSE), singleimpedance plane (also named XY flying dot), splitscreen (RF and XY), strip chart (named SCAN,representing amplitude and phase against time),split screen (XY + SCAN), SPECTRUM (amplitudeand phase against frequency) and split screen (XY +SPECTRUM).Other Standards or directives MIL Standard 810G, CE, WEEE, FCC (USA), IC(Canada), RoHS (China), RCM (Australia and NewZealand), KCC (Korea)Power requirements AC mains: 100 VAC to 120 VAC, or 200 VAC to240 VAC, 50 Hz to 60 HzWarranty One year limited; extra warranty year available forpurchase (W2-BONDMASTER600 [U8775337])Table 8 General and environmental specifications (continued)Category Parameter Value
