241Setting Recording Destination (Card Select)Setting Recording DestinationBy default, the recording destination is set tothe [SD Card] at the factory. To change therecording destination, follow the procedureoutlined below.1 Select [Card Select] at the [Device Menu]screen and press OK/MENU or 9button.Refer to P.36 regarding each menu item settings.2 Press the + or ā button to choosebetween [SD] and [micro SD].3 Press the OK/MENU button tocomplete the setup screen.[SD Card Selected] or [microSD Card Selected]will light up on the display, and it will return to the[Device Menu] screen.If the 0 or F1(BACK) is pressed, the settingwill be cancelled and it will return to the [DeviceMenu] screen.The recording destination ( or ) that wasset will appear on the display.4 Press F1(BACK) or 0 button to returnto the [Main Menu] screen, then pressF1(BACK) or 0 button again to exitthe setting.BACK EXITDevice MenuFingerprint12Card SelectBeepFormatUSB ClassTime & DateBACK EXITCard SelectSDmicroSD CardSelectedmSDBACK EXITCard SelectSDmicro SDmSD025 / 030FOLDER PRIOR INFOMIKEEQP DICTNew File02 M 10 s3 H 08 M 05sF1 buttonOK/MENU, + , ā,9, 0 button