433Fingerprint Registration (Fingerprint)Fingerprint registration is performed on therecorder. By selecting an Author ID from theAuthor list ( P.46) and then registering yourfingerprint, you can associate it to your Author ID.You can register up to 10 fingerprint data.1 Select [Fingerprint] from the [DeviceMenu] screen and press OK/MENU orthe 9 button.2 Press + or – to select [Enroll] and thenpress OK/MENU or the 9 button.3 Press + or – to select a registrationnumber and then press OK/MENU orthe 9 button.When making a new registration, select aregistration number that has not already beenregistered ( does not appear). When re-registering a fingerprint, select the previouslyregistered number ( does appear).Device Lock FunctionBACK EXITDevice MenuFingerprint12Card SelectBeepFormatUSB ClassTime & DateBACK EXITFingerprintData1JONATHANData3Data2- - - -abDS5000IDBACK EXITFingerprintEnrollVerifyUnlock DeviceEnter PasswordDevice isLocked09 : 59a Connection withAuthor IDb No connection withAuthor IDPress yourfinger firmly atthe fingerprintsensor, and slideit at a constantspeed.Unlocking the Recorder Via FingerprintVerification (Only DS-5000iD)Slide the finger to be scanned forverification over the scanner window on theback side of the recorder in one sweepingmotion from top down as shown in theillustration.If [NG! Sweep Finger Again] is displayed, re-scan yourfinger or a different registered finger again. If there isno fingerprint match after 10 tries [IncorrectFingerprint Enter Password] will be displayed and itis not possible to authenticate via fingerprintverification.Authentication Halt ModeIf there is no password match after fivetries the recorder will enter passwordinput halt mode for ten minutes.After ten minutes have passed themismatch history will be erased and itwill once again return to the passwordinput screen.Device Lock FunctionIn case the fingerprint may not be scanned correctly,press your finger firmly against the sensor and sweep it.