Olympus DS-7000 Instructions Manual

Also see for DS-7000: Installation instructions Instructions Instructions

Contents

12EN CS DA DE ES FR NL PL RU SVMenu itemsFile MenuPriority:By default, the F2 button isprogrammed with the Priorityfunction. The setting can also beperformed from the menu.You can set a priority level on eachfile recorded. You can select “High” or“Normal”. The default is Normal level.[Set]:High level.[Cancel]:Normal level.• Each time the F2 (PRIORITY) buttonis pressed the Priority level willchange (High/Normal).Pending:When you set [Pending] to the file,the file becomes “Pending file”. If“Download file” is set to “Finished file”by ODMS software, the [Pending] fileis not transferred and only [Finished]file (edited file) will be transferredto your PC.[ Pending]:Sets to a file of “Editing” and [ ]will appear on the display.[ Finished]:Sets to a file of “already edited”.File Lock:The File lock function allows you toprevent important files from beingaccidentally erased.[On]:Locks the file and prevents it frombeing erased.[ ] will appear on the display.[Off]:Unlocks the file and allows it to beerased.2 Press the 9 or 0 button tomove to the tab that contains theitem you want to set.• You can change the menu displayby moving the settings tab cursor.3 Press the + or − button to move tothe item you want to set.• Move to the menu item you wantto set.4 Press the OK/MENU button.• Move to the setting of theselected item.5 Press the + or – button to changethe setting.• Pressing the 0 button withoutpressing the OK/MENU buttonwill cancel the settings and returnyou to the previous screen.6 Press the OK/MENU button tocomplete the setting.• You will be informed that thesettings have been establishedvia the screen.7 Press the F3 (EXIT) button to closethe menu screen.How to use the menuItems in menus are categorized bytabs, so select a tab first and move toa desired item to quickly set it. Youcan set each menu item as follows.1,4,6723,51,4,6723,51 While the recorder is in stop mode,press the OK/MENU button.• The menu will appear on thedisplay.Locating an index mark2 While playing back a file, press andhold the 9 or 0 button.• The recorder stops for 1 secondwhen it reaches the index mark.Clearing an index mark1 Select a file in which index marksyou want to erase are contained.2 Press the 9 or 0 button toselect the index mark to erase.3 While the index number appearsfor approximately 2 seconds on thedisplay, press the ERASE button.• The index mark is erased.Notes:• Up to 32 index marks can be setwithin a file.• When a file is locked or set to read-only, or when the SD card is locked,index mark cannot be erased.• If the recorder has been set to DSSClassic mode, index marks arelimited to a maximum of 16 for eachfile.