119ENUsing separately sold accessories1111Electronic Viewfinder (VF-4)The VF-4 electronic viewfi nder switches on automatically when you look through it.While the viewfi nder is on, the camera monitor display is switched off. You can selectwhether to automatically switch the display between the viewfi nder and monitor usingthe menu settings. Note that menus and other settings information are still displayedon the camera monitor when the viewfi nder is switched on.# Cautions• In the following situations, the viewfi nder may not switch off automatically.When in sleep mode/when shooting using movie, 3D, multiple exposure, live bulb, livetime etc./when the shutter button is pressed halfway/when the monitor is pulled out• The viewfinder may also fail to turn on automatically when viewed in certain situations,such as when wearing glasses, or under strong sunlight. Change to manual settings. Attaching and removing an electronic viewfinderRemove the connector cover while pressing down on the lock release button, and thenkeep pressing into the camera hot shoe until it will go no further.• To remove, turn off the camera, and remove while pressing down on the lock releasebutton.Attaching RemovingLock release buttonConnector coverHot shoecover Using a diopter adjustment dialTurn on the camera power, and then set the diopter adjustment dial to a position atwhich an image is visible in the view finder.• The angle can be changed up to a maximum 90°.u buttonEye sensorDiopter adjustment dialUsing separately sold accessories
