53ENLive control3Reducing camera shake (image stabilizer)You can reduce the amount of camera shake that can occur when shooting in low lightsituations or shooting with high magnifi cation. The image stabilizer starts when youpress the shutter button halfway.1 Display the live control and select the imagestabilizer item using FG. WBAUTOWBWBWBAUTOAUTOAUTOL F4:3jWBAUTOWBWBWBAUTOAUTOAUTOmmmm5050HDS-ISS-ISS-ISS-IS S-ISS-IS S-ISS-ISOFFOFF S-IS AUTOS-IS AUTOPFocal LengthAuto2 Select an option with HI and press Q.StillpictureOFF S-I.S. Off Image stabilizer is off.S-IS1 Auto Image stabilizer is on.S-IS2 Vertical ISImage stabilization applies only to vertical(Y) camera shake. Use when panning thecamera horizontally.S-IS3 Horizontal ISImage stabilization applies only to horizontal(Z) camera shake. Use when panning thecamera horizontally with the camera held inportrait orientation.S-IS AUTO LandscapePanning I.S.The camera detects the panning direction andapplies the appropriate image stabilization.MovieOFF M-I.S. Off Image stabilizer is off.ON Movie-I.S.In addition to Auto image stabilization, camerashake that occurs when shooting whilewalking is also reduced.Choosing a focal length (Micro Four Thirds/Four Thirds System lenses excluded)Use focal length information to reduce camera shake when shooting with lenses that are notMicro Four Thirds or Four Thirds system lenses.• Select [Image Stabilizer], press the INFO button, use HI to select a focal length, andpress Q.• Choose a focal length between 8 mm and 1000 mm.• Choose the value that most closely matches to the one that is printed on the lens.# Cautions• The image stabilizer cannot correct excessive camera shake or camera shake that occurswhen the shutter speed is set to the slowest speed. In these cases, it is recommendedthat you use a tripod.• When using a tripod, set [Image Stabilizer] to [OFF].• When using a lens with an image stabilization function switch, priority is given to the lensside setting.• When priority is being given to the lens side image stabilization and the camera side is setto [S-IS-AUTO], [S-IS1] is used instead of [S-IS-AUTO].• You may notice an operating sound or vibration when the image stabilizer is activated.
