15ENPreparing the camera and flow of operations1Power on1 Press the ON/OFF button to turn on the camera.• When the camera is turned on, the (blue) power lamp will light and the monitor willturn on.• To turn off the power, press the ON/OFF button again.250250 F5.6 01:02:0301:02:033838ISO-A200RR ON/OFF button MonitorBattery level7 (green): Camera ready to shoot.Displayed for about 10 secondsafter the camera is turned on.8 (green): Low battery9 (blinks red): Charge the battery.Number of storable still picturesAvailable recording timeUsing the monitor21 3You can adjust the angle ofthe monitor.When set to the angle to take yourown picture, the monitor display up/down direction inverts.Camera sleep operationIf no operations are performed for a minute, the camera enters “sleep” (stand-by) mode toturn off the monitor and to cancel all actions. The camera activates again when you touchany button (the shutter button, q button, etc.). The camera will turn off automatically ifleft in sleep mode for 5 minutes. Turn the camera on again before use.
