Using the camera with a Dock&Done storage unit (hard disk/DVD)1069i functions4 Set the camera in the cradle.• The camera turns on, and the [_DOCKMODE] screen is displayed.• The camera is powered by the ACadapter of the storage unit.• When an unformatted disk is inserted inthe DVD storage unit, the disk formatscreen is displayed. For details, refer tothe instruction manual for your DVDstorage unit.5 Select [STORE ONLY], and pressi.• The displayed screen and selectableitems vary depending on the camerasettings.g“Camera settings” (P. 113),“[_DOCK MODE] screen menu”(P. 112)• When the pictures have been stored,the camera turns off automatically.TIPS• You can also individually select the pictures to be stored to the storage unit.g“Storing pictures (STORE)” (P. 113)• You can also set the camera to automatically erase pictures after they havebeen stored to the storage unit. g“Settings after storing (STORE AND)”(P. 113)• When the camera is off, the camera battery is charged by the AC adapter of thestorage unit.Note• When a card is inserted in the camera, only the pictures on the card are stored.To store pictures in the internal memory, remove the card.• Packet-writing software is required if you want to view pictures stored on a diskwith the DVD storage unit. For details about packet-writing software, see themanual of the optional Dock&Done DVD storage unit.DOCK MODE20SEC. TILL AUTO STORESTORE PRINT ORDERSTORE ONLYSEL. PRINTSTOREEXIT
