28 EN● [Set 1], [Set 2] or [Set 3] retouches the imageaccording to the Beauty Settings.[Beauty Settings] (p. 57)3 Point the camera toward the subject. Checkthe frame appearing around the face detectedby the camera,and then press the shutterbutton to take the picture.The unedited image and edited image are both saved.If the image cannot be retouched, only the uneditedimage is saved.The [Image Size] of the retouched image is fixed at[n].Only the face detected by the camera is retouched.4 Select [OK] or [Beauty Fix] on the reviewscreen, and press the A button to save or toretouch the image additionally.OKBeauty FixMENUBackBeauty FixBeauty Fix1 Select a retouching item, and press the A button.MENUOffEye Color Back2 Press the A button on the review screen.● Settings for Beauty Fix can be registered.[Beauty Settings] (p. 57)Creating panoramic images (p mode)1 Set the shooting mode to p.2 Use HI to select the mode. When selecting[Auto], press G. When selecting other than[Auto], press the A button.MENUMENU0.00.0AUTOWBAUTOWB2 MAUTOAUTOPCPC MANUALMANUALAUTOISOAUTOISOAutoSubmenu ApplicationAutoPanorama images are automaticallycombined just by swinging the camera inthe shooting direction. Press the shutterbutton once to begin the sequence.ManualThree frames are taken and combinedby the camera. The user composesthe shots using the guide frame andmanually releases the shutter.PCThe frames that were taken arecombined into a panorama image usingthe PC software.3 When shooting with [Auto]Use HI to select the angle of view and thenpress the A button.For details on installing the PC software, see “Usingthe supplied CD for setup” (p. 13).