Olympus SH-25MR Instruction Manual

Also see for SH-25MR: Specification Basic Manual

49ENFor information on using the menus, see “Setup menu” (p. 8).Erasing images [Erase]Erasing images [Erase]q (Playback Menu) X EraseSubmenu 2 ApplicationAll Erase All images in the internal memory or cardwill be erased.Sel. Image Images are individually selected anderased.Erase Deletes the image displayed.Erase Group All images in the group are erased (p. 38).When erasing pictures in the internal memory, do notinsert the card into the camera.Protected images cannot be erased.To individually select and erase imagesTo individually select and erase images[Sel. Image][Sel. Image]1 Use FG to select [Sel. Image], and press theA button.2 Use HI to select the image to be erased, and pressthe A button to add a R mark to the image.● Turn the zoom lever to the W end to display anindex view. Images can be quickly selected usingthe FGHI buttons. Turn to the T end to returnto the single frame display.Sel. Image (1)Erase/CancelOKMENU4/304/30R mark3 Repeat Step 2 to select the images to be erased,and then press the m button to erase the selectedimages.4 Use FG to select [Yes], and press the A button.● The images with a R mark are erased.To erase all images [All Erase]To erase all images [All Erase]1 Use FG to select [All Erase], and press theA button.2 Use FG to select [Yes], and press the A button.Protecting images [Protecting images [RR]]q (Playback Menu) X RProtected images cannot be erased by [Erase] (p. 23,49), [Sel. Image] (p. 49), [Erase Group] (p. 49) or [AllErase] (p. 49), but all images are erased by [MemoryFormat]/[Format] (p. 50).1 Use HI to select an image.2 Press the A button.● Press the A button again to cancel the settings.3 If necessary, repeat Steps 1 and 2 to protect otherimages, and press the m button.Select images for upload to the InternetSelect images for upload to the Internetusing the supplied OLYMPUS Viewer 2using the supplied OLYMPUS Viewer 2software [Upload Order]software [Upload Order]q (Playback Menu) X Edit X Upload Order1 Use HI to select an image.2 Press the A button.● Press the A button again to cancel the settings.3 Repeat Steps 1 and 2 as required.4 Press the m button.Only JPEG fi les can be selected for upload.See on-line help for upload instructions.GPS data recorded with images can not be deleted.Select [Off] for [GPS Settings] if you do not wish toreveal the locations where photographs were taken.