51ENFor information on using the menus, see “Setup menu” (p. 8).Remove the Eye-Fi card from the camera or select[Off] for [Eye-Fi] in airplanes and other locations inwhich use is prohibited.This camera does not support the Eye-Fi card’sEndless mode.Saving print settings to the image dataSaving print settings to the image data[Print Order][Print Order]x (Settings Menu 1) X Print Order“Print Reservations (DPOF)” (p. 62)Print reservation can be set only for still images thatare recorded to the card.Selecting a method for connectingSelecting a method for connectingthe camera to other devicesthe camera to other devices[USB Connection][USB Connection]x (Settings Menu 1) X USB ConnectionSubmenu 2 ApplicationAutoWhen the camera is connected toanother device, the settings selectionscreen is displayed.Storage Select when connecting the camerato a computer via a storage device.MTPSelect when transferring imageswithout using the supplied [ib](PC software) on Windows Vista/Windows 7.Print Select when connecting to aPictBridge-compatible printer.System requirementsSystem requirementsWindows : Windows XP Home Edition/Professional (SP1 or later)/Vista/Windows 7Macintosh : Mac OS X v10.3 or laterWhen using another system other than Windows XP(SP2 or later)/Windows Vista/Windows 7, set to[Storage].Even if a computer has USB ports, proper operationis not guaranteed in the following cases:● Computers with USB ports installed using anexpansion card, etc.● Computers without a factory-installed OS andhome-built computersTurning on the camera with theTurning on the camera with the qqbutton [button [qq Power On]Power On]x (Settings Menu 1) X q Power OnSubmenu 2 ApplicationNoThe camera is not turned on. To turnon the camera, press the nbutton.Yes Press and hold the q button to turnthe camera on in the playback mode.