Olympus SP-810UZ Instruction Manual

Also see for SP-810UZ: Specifications

13ENWhen to charge the batteriesWhen to charge the batteriesCharge the battery when the error message shown belowappears.Monitor top left Error messageFlashes in red14 M4400:3400:34Battery EmptySetting up using the supplied CDInstallation of [ib] computer software using thesupplied CD is available on Windows computers only.WindowsWindows1 Insert the supplied CD in a CD-ROM drive.Windows XP● A “Setup” dialog will be displayed.Windows Vista/Windows 7● An Autorun dialog will be displayed. Click “OLYMPUSSetup” to display the “Setup” dialog.If the “Setup” dialog is not displayed, select “MyComputer” (Windows XP) or “Computer” (WindowsVista/Windows 7) from the start menu. Double-clickthe CD-ROM (OLYMPUS Setup) icon to open the“OLYMPUS Setup” window and then double-click“Launcher.exe”.If a “User Account Control” dialog is displayed, click“Yes” or “Continue”.2 Register your Olympus product.● Click the “Registration” button and follow the on-screen instructions.To register the camera must be connected to thecomputer. “Connecting the camera” (p. 12)If nothing is displayed on the camera screen evenafter connecting the camera to the computer, thebattery may be exhausted. Charge the battery andthen connect the camera again.3 Install OLYMPUS Viewer 2 and [ib] computersoftware.● Check the system requirements before beginninginstallation.● Click the “OLYMPUS Viewer 2” or “OLYMPUS ib”button and follow the on-screen instructions toinstall the software.OLYMPUS Viewer 2OperatingSystemWindows XP (Service Pack 2 or later) /Windows Vista / Windows 7Processor Pentium 4 1.3 GHz or betterRAM 1 GB or more (2 GB or morerecommended)Free HardDrive Space 1 GB or moreMonitorSettings1024 x 768 pixels or moreMinimum 65,536 colors (16,770,000colors recommended)