Olympus SP-810UZ Instruction Manual

Also see for SP-810UZ: Specifications

26 EN3 Move the camera slowly while keeping it straight, andstop the camera where the pointer and target markoverlap.● The camera releases the shutter automatically.AUTOAUTOMENU OKSaveCancelTo combine only two pictures, press the A buttonbefore taking a third frame.4 Repeat Step 3 to take a third frame.● After the third frame is taken, the cameraautomatically processes the frames and thecombined panorama image is displayed.To exit the panorama function without saving animage, press the  button.If the shutter does not automatically release, try[Manual] or [PC].Taking pictures with [Manual]Taking pictures with [Manual]1 Use FGHI to specify at which edge the nextpicture is to be connected.Direction for combiningthe next frame MANUALMANUALOKSet2 Press the shutter button to take the first frame. Thewhite-boxed part of the first frame is displayed on jointarea 1.1st frameMANUALMANUAL MANUALMANUAL1 21 2MENU OKSaveCancel3 Compose the next shot so that joint area 1 overlapsjoint area 2.4 Press the shutter button to take the next shot.Press the A button to combine just 2 frames.5 Repeat steps 3 and 4 to take a third frame.● After the third frame is taken, the cameraautomatically processes the frames and thecombined panorama image is displayed.To exit the panorama function without saving animage, press the  button.Taking pictures with [PC]Taking pictures with [PC]1 Use FGHI to select the direction that the framesare combined.2 Press the shutter button to take the first frame, andthen point the camera for the second frame. Theshooting procedure is same as that of [Manual].Panorama shooting is possible for up to 10 frames.3 Repeat Step 2 until the number of desired frames istaken, and then press the A button or  buttonwhen finished.Refer to the PC software help guide for details onhow to make panorama images.