Editing images159Image Edit WindowDistortion CorrectionThis function corrects distortion of the image. Batch processing can be used tocorrect several images at the same time.1 Click the [Distortion Correction] button on the image processingbar or select [Distortion Correction] from the [Image] menu.The [Distortion Correction] palette appears.2 Configure each item.3 Confirm that [Apply] is checked.When the settings on the palette are changed, [Apply] is automatically checkedand the settings are applied to the image.4 Click the [Distortion Correction] button on the image processingbar or select [Distortion Correction] from the [Image] menu toclose the [Distortion Correction] palette.[Distortion Correction] paletteItem DescriptionApply Check this box to apply the settings to the image.Uncheck this box to cancel the settings.Auto The correction information added to the image is read and theimage distortion is corrected automatically. If there is nocorrection information added to the image or the distortion hasalready been corrected, this option is grayed out and cannot beselected.Manual You can manually correct the image distortion by dragging theslider to the left or right. The distortion correction level can beset from [–100] to [100]. You can click or to set the levelin increments of 10. You can also directly enter the correctionlevel.• When using [Auto], the distortion may not be properly corrected in images shotusing an intermediate ring with the camera lens or using a telephoto lens.Note
