Editing images160Image Edit WindowShading Comp.This function corrects the shading (adjusts the amount of peripheral light) of theimage. Shading can be corrected only in JPEG, TIFF, or RAW images to whichshading information has been added. Batch processing can be used to correctseveral images at the same time.1 Click the [Shading Comp.] button on the image processing baror select [Shading Comp.] from the [Image] menu.The [Shading Comp.] palette appears.2 Configure each item.3 Confirm that [Apply] is checked.When the settings on the palette are changed, [Apply] is automatically checkedand the settings are applied to the image.4 Click the [Shading Comp.] button on the image processing baror select [Shading Comp.] from the [Image] menu to close the[Shading Comp.] palette.[Shading Comp.] paletteItem DescriptionApply Check this box to apply the settings to the image.Uncheck this box to cancel the settings.Auto The correction information added to the image is read and theshading is corrected automatically. If there is no correctioninformation added to the image or the shading has alreadybeen corrected, this option is grayed out and cannot beselected.Manual You can manually correct the shading by dragging the slider tothe left or right. The shading correction level can be set from[0]% to [100]%. You can click or to set the level inincrements of 10%. You can also directly enter the correctionlevel.• When using [Auto], the distortion may not be properly corrected in images shotusing an intermediate ring with the camera lens or using a telephoto lens.Note
