211Camera Control WindowThe camera control window can be used to shoot images with a camera connectedto the computer by a USB or IEEE1394 (FireWire) cable. The images are saveddirectly in the computer and displayed in the camera control window without beingsaved in the storage media inside the camera.Images can be shot either by clicking the [AF Shooting] or [Shooting] button on thecamera control window (PC Master mode) or by pressing the shutter button on thecamera (Camera Master mode).PC Master mode and Camera Master modeA comparison of the settings and shooting in PC Master mode and Camera Mastermode is shown below.Shooting imagesPC Master mode Camera Master modeCamera settingsThe settings are configured inthe camera control window.The settings can be changedusing the [Shooting Setup /Camera Setup] dialog box.The settings are configuredwith the camera.The buttons and menus onthe camera are used toconfigure the settings.Shooting imagesImages are shot by clickingthe [AF Shooting] or[Shooting] button on thecamera control window.Images are shot bypressing the shutter buttonon the camera.Transferring imagesImages are automaticallytransferred to the computer.You can preview the imageson the computer and savepermanent only those imagesthat are needed.Images are automaticallytransferred to the computer.Destination of theimagesImages are saved directly to a specified folder on thecomputer. It is recommended that you use the hard disk ofyour computer as the destination to which to save theimages.Images are not saved in the camera’s storage media evenwhen used inside the camera.RestrictionsAll camera buttons except thepower button are locked andcannot be operated.The camera cannot beoperated from thecomputer.Switching between PCMaster mode andCamera Master modeClick the [PC Shooting]button on the camera controlwindow.Click the [Camera Shooting]button on the cameracontrol window.
