Olympus Stylus 1050 SW Instruction Manual

ENResetting the file name numbers ofpictures [FILE NAME]x SETUP  FILE NAMEMonth: 1 to C(A=October,B=November,C=December)Day: 01 to 31PmddFolder name Folder name File nameDCIM 100OLYMP999OLYMPPmdd0001.jpgPmdd9999.jpgAutomaticnumberingAutomaticnumberingSubmenu 2 ApplicationRESETThis resets the sequential numberfor the folder name and file namewhenever a new card is inserted. *1This is useful when groupingimages on separate cards.AUTOEven when a new card is inserted,this continues the numbering forthe folder name and file name fromthe previous card. This is useful formanaging all image folder namesand files names with sequentialnumbers.*1 The number for the folder name is reset to 100, andthe one for the file name is reset to 0001.Adjusting the CCD and adjusting theimage processing function[PIXEL MAPPING]x SETUP  PIXEL MAPPINGThis function has already been adjustedat factory shipping, and no adjustment isneeded right after purchase. Approximatelyonce a year is recommended.For best results, wait at least one minuteafter taking or viewing pictures beforeperforming pixel mapping. If the camera isturned off during pixel mapping, be sure toperform it again.To adjust the CCD and to adjust theimage processing functionPress the o button when [START](submenu 2) is displayed.The camera checks and adjusts the CCD and theimage processing function at the same time.●