Olympus Stylus 1050 SW Instruction Manual

ENUsing the alarm [ALARM CLOCK]x SETUP  ALARM CLOCKWhen [X] has not been set, [ALARM CLOCK] is not available.When [jSILENT MODE] (p. 49) is set to [ON], the alarm will not sound.When [DUALTIME] (p. 45) is set to [ON], the alarm is activated at the date and time set in[DUALTIME].Submenu 2 Submenu 3 Submenu 4 ApplicationOFF — — The alarm is canceled.ONE TIMETIME(Proceeds tothe time settingscreen *1 .) The alarm is activated once according to theselected time, sound and volume settings.SNOOZE*2 OFF/ONSOUND TYPE 1/2/3VOLUME LOW/HIGHDAILY (Submenus 3 and 4 can be set in thesame way as [ONE TIME].) The alarm is activated daily at the same settings.*1 The setting procedure is identical to that in “Setting the date and time” (p. 13).*2 In this setting, even if the alarm is stopped once, it will be activated every 5 minutes, up to 7 times.To check the alarm time, press the g button while the camera is turned off. The current andalarm set times are displayed for approx. 3 seconds.To activate the alarm To stop the alarmAfter making the detailed settings of [ONETIME] or [DAILY], press the o button toturn off the camera.When the alarm is activated, press any buttonto stop the alarm and turn off the camera.When [SNOOZE] is set to [OFF], the alarmstops automatically and the camera turns offafter 1 minute of no operation.Selecting the video signal system to match your TV [VIDEO OUT]x SETUP  VIDEO OUTThe TV video signal system varies depending on the countries and regions. Before viewing cameraimages on your TV, select the video output according to your TV’s video signal type.Submenu 2 ApplicationNTSC Connecting the camera to a TV in North America, Taiwan, Korea, Japan, and so onPAL Connecting the camera to a TV in European countries, China, and so onThe factory default settings differ according to the region where the camera is sold.