37ENRefer to “Using the Menu” (p. 3) when adjusting the settings of these functions.Menus for Other Camera SettingsThese settings can be made from the shooting mode top menu or playback mode top menu.Erasing data completely[MEMORY FORMAT]/[FORMAT]E SETUP X MEMORY FORMAT/FORMATBefore formatting, check that no important datais left in the internal memory or card.Non-Olympus cards and cards that have beenformatted by a computer must be formattedwith this camera before use.Submenu 2 ApplicationYESCompletely erases the image datain the internal memory *1 or card(including protected images).NO Cancels formatting.*1 Be sure to remove the card before formatting theinternal memory.Copying images from the internalmemory to the card [BACKUP]E SETUP X BACKUPSubmenu 2 ApplicationYES Backs up image data from theinternal memory to the card.NO Cancels the backup.It takes some time to back up data. Check thatthe battery has sufficient power before startingthe backup, or use an AC adapter.Changing the display language [W]E SETUP X W“Changing the display language” (p. 13)Submenu 2 ApplicationLanguages *1The language for the menus anderror messages displayed on themonitor is selected.*1 The available languages vary depending on the countryand/or region where the camera was purchased.Setting the startup display screen andsound when the camera is turned on[PW ON SETUP]E SETUP X PW ON SETUPSubmenu 2 Submenu 3 ApplicationSCREENOFF No image is displayed.1 A preset image *1 isdisplayed.2A still image stored in theinternal memory or card isregistered for display. (Thisoption leads to the setupscreen.)VOLUMEOFF (Nosound)/LOW/HIGHThe volume of the startupsound is selected.*1 This image cannot be changed.To register a startup image1 Select [2] in submenu 3 for [SCREEN].2 Use NO to select the image to be registered,and press the E button.