55ENAppendixBattery and chargerThis camera uses one Olympus lithium-ionbattery (LI-42B/LI-40B). No other type ofbatteries can be used.CAUTION:There is a risk of explosion if the batteryis replaced with the incorrect battery type.Dispose of the used battery following theinstructions. “Battery Handling Precautions”(p. 60)Power consumption by the camera variesdepending on which functions are used.During the conditions described below, power isconsumed continuously and the battery becomesexhausted quickly.The zoom is used repeatedly.The shutter button is pressed halfwayrepeatedly in shooting mode, activating theauto focus.A picture is displayed on the monitor for anextended period of time.The camera is connected to a computer orprinter.Using an exhausted battery may cause thecamera to turn off without displaying the batterylevel warning.The rechargeable battery is not fully charged atthe time of purchase. Charge the battery fullywith LI-41C/LI-40C charger before use.The provided rechargeable battery usually takesapproximately 2 hours to charge (varies withusage).The supplied LI-41C battery charger is used onlyfor LI-42B/LI-40B battery. Do not charge othertype of battery with the supplied battery charger.It might cause explosion, leaking, overheatingor fire.For plug-in type battery charger:This power unit is intended to be correctlyorientated in a vertical or floor mount position.••••••••••••Camera careExteriorWipe gently with a soft cloth. If the camera isvery dirty, soak the cloth in mild soapy water andwring well. Wipe the camera with the damp clothand then dry it with a dry cloth. If you have usedthe camera at the beach, use a cloth soaked inclean water and wrung well.MonitorWipe gently with a soft cloth.LensBlow dust off the lens with a commercial blower,then wipe gently with a lens cleaner.Battery/ChargerWipe gently with a soft, dry cloth.Do not use strong solvents, such as benzeneor alcohol, or chemically treated cloth.Mold may form on the lens surface if the lens isleft dirty.StorageWhen storing the camera for extended periods,remove the battery, AC adapter and card, andkeep in a cool, dry place that is well ventilated.Periodically insert the battery and test thecamera functions.Avoid leaving the camera in places wherechemical products are handled since this mayresult in corrosion.••••••