40 ENAdjusting the brightness of the monitor[s]E SETUP X sTo adjust the monitor brightness1 Use LM to adjust the brightness whileviewing the screen, and then press the Ebutton.sSET OKMENUBACKSetting the date and time [X]E SETUP X X“Setting the date and time” (p. 13)To select the date and time display order1 Press O after setting Minute, and use LMto select the date display order.2009 08 26 12 30XY MY M DD TIMEMENUCANCELDate orderSetting the date and time for anothertime zone [DUALTIME]E SETUP X DUALTIMEWhen [DUALTIME] is set to [ON], the date andtime set here are used in image file names,dated prints and other data.Submenu 2 Submenu 3 ApplicationOFF — Switches to the date andtime set in [X].ON(Proceeds tothe settingscreen *1 .)The date and time settingsfrom [DUALTIME] are usedin file names, dated printsand other data.*1 The setting procedure is identical to that in “Setting thedate and time” (p. 13).The date display order is the same as that setwith [X].Automatically rotating images shot withthe camera in a vertical position duringplayback [PIC ORIENTATION]E SETUP X PIC ORIENTATIONDuring shooting, the [y] (p.35) setting on theplayback menu is set automatically.This function may not work properly if thecamera is facing upwards or downwards duringshooting.Submenu 2 ApplicationOFFInformation about the vertical/horizontal orientation of the cameraduring shooting is not recorded withimages. Images shot with the camerain a vertical position are not rotatedduring playback.ONInformation about the vertical/horizontal orientation of the cameraduring shooting is recorded withimages. Images are automaticallyrotated during playback.