Olympus Stylus Tough 8010 Instruction Manual

32 ENSequential shooting (Drive)Pictures are taken sequentially while the shutterbutton is held down.1 Select the drive option in theshooting function menu.0.00.0AUTOWBAUTOWBAUTOISOAUTOISOPPSEQUENTIALSEQUENTIALOption Descriptiono One frame is shot each time theshutter button is pressed.j*1Take sequential shots using thefocus, brightness (exposure) andwhite balance set in the first frame.W The camera takes sequential shotsat a faster speed than in [j].*1 The shooting speed varies depending on thesettings for [IMAGE SIZE/COMPRESSION] (p. 33).When set to [j], the fl ash (p. 28) cannotbe set to [REDEYE]. In addition, when set to[W] the flash is fi xed to [FLASH OFF].When set to [W], [IMAGE SIZE] is limitedto [3] or lower, and the ISO sensitivity isfi xed to [ISO AUTO].Using the LED illuminator(STYLUS TOUGH-8010/μ TOUGH-8010 andSTYLUS TOUGH-6020/μ TOUGH-6020 only)In a dark location, the LED illuminator canbe used as an auxiliary light to see things orcompose shots.1 Set [LED ILLUMINATOR] (p. 52) to[ON].2 Press and hold F down until theLED illuminator lights up.If you perform an operation when the LEDilluminator is on, it will illuminate up to approx. 90seconds.LEDilluminatorThe LED illuminator turns off if no operationis performed for approx. 30 seconds.Even when the camera’s power is turnedoff, if F is pressed until the LED illuminatorlights up, it lights for 30 seconds.To turn the LED illuminator offPress and hold F down, until the LEDilluminator turns off.●