44 ENThe default settings of the function are highlighted in .Restoring data in the camera[DATA REPAIR]r (Settings 1) X DATA REPAIRPlayback will become available byperforming [DATA REPAIR] when imagesnever appear on the monitor after q buttonis pressed. However, data such ascollections and other groups created withthe PC software (ib) is deleted from thedatabase in the camera.Import the data back into the camera from acomputer to playback the data created withthe PC software (ib).Copying images in the internal memoryto the card [u COPY]r (Settings 1) X u COPYTo copy images in the internal memoryto the cardUse HI to select an image, and press theA button.Changing the display language [l]r (Settings 1) X l“Changing the display language” (p. 15)Submenu 2 ApplicationLanguagesThe language for the menus anderror messages displayed on themonitor is selected.Menus for Other Camera SettingsSelecting a storage device[INTERNAL/SD]r (Settings 1) X INTERNAL/SDSubmenu 2 ApplicationAUTOIf a card is inserted, the card isautomatically selected. If no cardis inserted, internal memory isused.IN*1 Internal memory is selected.*1 Internal memory is used even if a card is inserted.Erasing data completely[MEMORY FORMAT]/[FORMAT]r (Settings 1) X MEMORY FORMAT/FORMATBefore formatting, check that no importantdata is left in the internal memory or card.If the internal memory is formatted, thecamera instruction manual and the PCsoftware (ib) data that are stored on theinternal memory are erased. If necessary,store the backup before formatting.Cards must be formatted with this camerabefore first use or after being used withother cameras or computers.Submenu 2 ApplicationYES*1Completely erases the image datain the internal memory or card(including protected images).NO Cancels formatting.*1 If [AUTO] is selected for [INTERNAL/SD] and a cardis inserted, the card will be formatted. If no card isinserted, internal memory will be formatted.If [IN] is selected for [INTERNAL/SD], internalmemory will be formatted whether a card is insertedor not.