Olympus TG-2 Instruction Manual

Also see for TG-2: Instruction manual Specifications

Olympus TG-2 Instruction Manual Manual pdf 10 page image

10 ENLearning how to use thecameraƔ Press the n button to turn on the camera andenter the standby mode. (Press the n buttonagain to turn off the camera.)Ɣ Select the shooting mode, and press the shutterbutton to shoot a still image.Ɣ To shoot a movie, press the R button.Ɣ Set the shooting functions using the functionmenu or the setup menu.Ɣ To view images, press the q button to switch toplayback mode.Ɣ To return to standby mode, press the q buttonagain, or press the shutter button halfway downand then release it.Ɣ Press and hold the q button while the camera isturned off to start up the camera in the playbackmode.Ɣ In this case, pressing the q button again setsthe camera to the standby mode.Shooting still images1 Press the n button to turn onthe camera.2 Select the shooting mode. (p. 14)3 Hold the camera and compose theshot.When holding the camera, take care not to coverthe ash, microphone or other important partswith your ngers, etc.Take care so that the ash window is notexposed to ngerprints or dirt.Press and hold A button to brighten the monitorwhen there is dif culty in seeing the monitor. Themonitor brightness returns to the default setting ifno operations are performed for 10 seconds.