Olympus TG-2 Instruction Manual

Also see for TG-2: Instruction manual Specifications

Olympus TG-2 Instruction Manual Manual pdf 47 page image

47ENPlaying back images on a TVPlaying back images on a TV dd [TV Out][TV Out]The TV video signal system varies depending on the countries and regions. Before viewing cameraimages on your TV, select the video output according to your TV’s video signal type.Submenu 2 Submenu 3 ApplicationNTSC/PALNTSC Connecting the camera to a TV in North America, Taiwan, Korea,Japan, and so on.PAL Connecting the camera to a TV in European countries, China, andso on.HDMI Out480p/576p720p1080iSet the signal format to be given priority. If the TV setting does notmatch, it is changed automatically.HDMI Control Off Operate with the camera.On Operate with the TV remote control.The factory default settings differ according to the region where the camera is sold.To play back camera images on a TVTo play back camera images on a TVƔ Connection via AV cable1 Use the camera to select the same video signal system as the one of connected TV ([NTSC]/[PAL]).2 Connect the TV and camera.Ɣ Connection via HDMI cable1 On the camera, select the digital signal format that will be connected ([480p/576p]/[720p]/[1080i]).2 Connect the TV and camera.3 Turn on the TV, and change “INPUT” to “VIDEO (an input jack connected to the camera)”.4 Turn on the camera, and use FGHI to select the image for playback.Ɣ When the camera is connected to the computer by the USB cable, do not connect the HDMI cable to thecamera.