13ENPreparing the CameraPreparing the CameraInserting the battery12Insert the battery by putting in the ▼ marked sidefi rst, with the C marks toward the battery lock knob.Damage to the battery exterior (scratches, etc.) mayproduce heat or an explosion.Insert the battery while sliding the battery lock knob inthe direction of the arrow.211Battery/card/connector coverBattery/card/connector cover lock211Battery/card/connector coverBattery/card/connector cover lockBattery lock knobBattery lock knob3When removing the battery or card, be sure to turn offthe camera before opening or closing the battery/card/connector cover.When using the camera, be sure to close and lockthe battery/card/connector cover.Slide the battery lock knob in the direction of thearrow to unlock, and then remove the battery.Charging the battery and setting upusing the supplied CDConnect the camera to the computer to charge the batteryand use the supplied CD for setup.User registration using the supplied CD andinstallation of ib computer software is available onWindows computers only.The camera battery can be charged while the camera isconnected to a computer.The indicator lamp lights during charging and turnsoff when charging is complete.Charging takes up to 3 hours.If the indicator lamp does not light, the camera is notcorrectly connected or the battery, camera, computer,or USB cable may not be functioning as expected.●112112