Olympus TG-320 Instruction Manual

Also see for TG-320: Instruction manual Specifications Manual de instrucciones Manuel d'instructions Manual de instruções

50 ENFor information on using the menus, see “Setup menu” (p. 6).Adjusting the CCD and the imageAdjusting the CCD and the imageprocessing function [Pixel Mapping]processing function [Pixel Mapping]s (Settings 2) X Pixel MappingThis function has already been adjusted at factoryshipping, and no adjustment is needed rightafter purchase. Approximately once a year isrecommended.For best results, wait at least one minute after takingor viewing pictures before performing pixel mapping.If the camera is turned off during pixel mapping, besure to perform it again.To adjust the CCD and the imageTo adjust the CCD and the imageprocessing functionprocessing functionPress the A button when [Start] (Submenu 2) isdisplayed.The camera checks and adjusts the CCD and theimage processing function at the same time.●Adjusting the brightness of the monitorAdjusting the brightness of the monitor[[ss]]s (Settings 2) X sTo adjust the monitor brightnessTo adjust the monitor brightness1 Use FG to adjust the brightness while viewing thescreen, and then press the A button.MENU OKSetBacksPlaying back images on a TV [TV Out]Playing back images on a TV [TV Out]s (Settings 2) X TV OutThe TV video signal system varies depending on the countries and regions. Before viewing camera images on yourTV, select the video output according to your TV’s video signal type.Submenu 2 Submenu 3 ApplicationVideo Out NTSC Connecting the camera to a TV in North America, Taiwan, Korea, Japan,and so on.PAL Connecting the camera to a TV in European countries, China, and so on.HDMI Out480p/576p720p1080iSet the playback format.HDMI Control Off Operate with the camera.On Operate with the TV remote control.The factory default settings differ according to the region where the camera is sold.