48 ENFor information on using the menus, see “Setup menu” (p. 6).Selecting a method for connectingSelecting a method for connectingthe camera to other devicesthe camera to other devices[USB Connection][USB Connection]r (Settings 1) X USB ConnectionSubmenu 2 ApplicationAutoWhen the camera is connected toanother device, the settings selectionscreen is displayed.Storage Select when connecting the camerato a computer via a storage device.MTPSelect when transferring imageswithout using the supplied ib (PCsoftware) on Windows Vista/Windows 7.Print Select when connecting to aPictBridge-compatible printer.System requirementsSystem requirementsWindows : Windows XP (Service Pack 1 orlater) /Windows Vista / Windows 7Macintosh : Mac OS X v10.3 or laterWhen using another system other than Windows XP(SP2 or later)/Windows Vista/Windows 7, set to[Storage].Even if a computer has USB ports, proper operationis not guaranteed in the following cases:Computers with USB ports installed using anexpansion card, etc.Computers without a factory-installed OS andhome-built computers●●Turning on the camera with theTurning on the camera with the qqbutton [button [qq Power On]Power On]r (Settings 1) X q Power OnSubmenu 2 ApplicationNoThe camera is not turned on. To turnon the camera, press the nbutton.Yes Press and hold the q button to turnthe camera on in the playback mode.Saving the mode when the camera isSaving the mode when the camera isturned off [Keepturned off [KeepzzSettings]Settings]r (Settings 1) X KeepzSettingsSubmenu 2 ApplicationNo The shooting mode is set to P modewhen the camera is turned on.YesThe shooting mode is saved whenthe camera is turned off and isreactivated the next time the camerais turned on.Choosing the opening screen displayChoosing the opening screen display[Pw On Setup][Pw On Setup]r (Settings 1) X Pw On SetupSubmenu 2 ApplicationOff No opening screen is displayed.On The opening screen is displayedwhen the camera is turned on.