Test Procedures22Smart CardThe introduction of MOT computerisation requires the use of a Smart Card to passdata to the OmiSmoke. A Smart Card reader is connected to the socket on the sideof the handset, market ‘VI Interface’(9 pin D type).On the ‘Insert Smart Card’ screen, press the tick key to confirm. Data will then be readfrom the smart card to the OmiSmoke.Press the cross key if a smart card is not used. If ‘No Card’ is selected move on to‘Test Type’ section.‘Enter VRM or Test Number’ will appear on the screen.VRM = Vehicle Registration NumberTest number = MOT test numberVI INTERFACE RPM OIL PROBE9 pin D typeOM0479
