PaceMaster Gold XRC Owner's Manual
                                   | |
ASSEMBLY INSTRUCTIONSInstallation RequirementsYour PaceMaster should be installed indoors on a flat, level surface near a 120Volt/ Grounded outlet. You must havea minimum of 2 feet of clearance on all sides between the bike and any wall or obstruction.TIP: If you are installing your PaceMaster on a carpeted surface, use a equipment mat or a scrap piece of carpetunderneath the Recumbent to avoid soiling of the carpet. Deep pile carpet is not recommended.Unpacking Your Recumbent Exercise BikeOn the next page is a listing of all the parts included in the box. Open the box and confirm that you have received allof the parts indicated on page 6. If you are missing parts please contact your Authorized PaceMaster Dealer whereyou purchased your piece of equipment.Tools Required for Assembly (included)• Phillips head screwdriver• 13 mm Wrench• 15 mm Wrench• 4 mm Allen Wrench• 6 mm Allen Wrench5 |
Related manuals for PaceMaster Gold XRC
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine