Panasonic 9TGCF-P13 Operating Instructions Manual

29SD Memory Card/MultiMedia CardInserting/Removing an SD Memory Card/MultiMedia CardAn SD memory card/MultiMedia Card can be used for the following purposes.The exchange of data with various devices equipped with an SD memory card/MultiMediaCard slot, audio storage, and so on.1 Open the SD memory card/MultiMedia card slotcover.2 InsertingSlide the card in until it snaps into place as shown in theillustration.Make sure the labeled face of the SD memory card/MultiMedia card is towards the front of the computer andthen firmly insert the card. If you mistake the back side ofthe card with the top surface side, the card cannot be in-serted all the way into the slot.Do not insert the card at an angle.Insert the card all the way into the slot.Removing(1) Press the card. It will come out slightly.(2) Remove the card.3 Close the SD memory card/MultiMedia Card slotcover.NOTESoftware (e.g., drivers) required to exchange data with these devices. (Refer to theinstructions manual provided with each SD compatible peripheral device.)Use as a memory card (e.g., use as a storage unit on which files can be written).CAUTIONBefore removing an SD memory card/MultiMedia card or powering off CF-P1, check to seeif CF-P1 is trying to access the card. Such accesses are done intermittently for a shortperiod of time. Be sure to remove the card or power off CF-P1 only after confirming thatCF-P1 is not trying to access the card. If the card is removed or CF-P1 is powered offduring an access attempt, valuable data may be lost or CF-P1 may fail to work properly.SD Memory Card/MultiMedia Card Slot