Panasonic AE3000U - LCD Projector - HD 1080p Operating Instructions Manual

Contents

Panasonic AE3000U - LCD Projector - HD 1080p Operating Instructions Manual Manual pdf 26 page image

Basic OperationRemote control operation26 - ENGLISHYou can adjust a selected color individually andsave and retrieve under the PICTURE MODEsetting. Press the COLOR MANAGEMENTbutton to open the menu. See “COLORMANAGEMENT” on page 35.J Create a new profileQ Adjusting the selected colorSelect a color and adjust COLOR, TINT andBRIGHTNESS.1. Select the CURSOR menu and press ENTER.The projected image is captured, and the targetcursor is displayed.When the LOG is fully stored, the target cursor willnot be displayed.2. Move the cursor with F G I H to the requiredplace to select a color and press ENTER.The color at the center of the target cursor issampled and the sample box is displayed on the leftof the cursor. The menu items are displayed on theupper part of the screen.You may fail to adjust when the very edge point ofthe projection area is selected as sample.3. Select a menu item and the I H to adjust eachitem level.The result box is displayed on the right of the cursorand shows the adjusted color.4. Press ENTER to store the adjusted result.“PROCESSING” is displayed for a few seconds andthe result is stored in LOG.You can store up to 8 logs under LOG for eachPICTURE MODE setting.5. Press MENU or RETURN to return to the previousmenu.Repeat the steps above to store more adjustment.Q Managing stored logsYou can edit or delete the stored logs of theselected PICTURE MODE.1. Select LOG and press ENTER.The LOG menu is displayed.2. Select the required log from 1 - 8 or ALL DELETE,and press ENTER.Select CHANGE to edit the log.The cursor menu is displayed and you can readjustthe color.Select DELETE to delete the log.The confirmation screen will be displayed. Select OKto delete.When you select ALL DELETE, the "DELETE ALLLOG." screen is displayed. Select OK to delete alllogs. The PROFILE setting will be set to NORMAL.Setting your own color profileNORMALPROFILE SAVEPROFILE DELETEPROFILE NAME CHANGELOGCURSORPROFILETarget cursorSELECTCURSORRETURNENTERDEFAULTCOLORTINTBRIGHTNESSSampled colorCOLOR Adjust the vividness of the color.Setting range: -30 to +30TINT Adjust the color tone.Setting range: -30 to +30BRIGHTNESS Adjust the brightness of the color.Setting range: -20 to +20SELECTCURSORRETURNENTERDEFAULTCOLORTINTBRIGHTNESSAdjusted colorPICTURE MODE : CINEMA1POINT1POINT2POINT3POINT4POINT5POINT6POINT7POINT8ALL DELETESampled color Adjusted color