Precautions with regard to safety8 - ENGLISHImportantInformationDo not short-circuit, heat or disassemble thebatteries or place them into water or fire.Failure to observe this may cause the batteries tooverheat, leak, explode or catch fire, and burns orother injury may result.When inserting the batteries, make sure thepolarities (+ and -) are correct.If the batteries are inserted incorrectly, they mayexplode or leak, and fire, injury or contamination ofthe battery compartment and surrounding area mayresult.Use only the specified batteries.If incorrect or different kinds of batteries are used,they may explode or leak, and fire, injury orcontamination of the battery compartment andsurrounding area may result.Do not mix old and new batteries.If the batteries are used mixing old and new, theymay explode or leak, and fire, injury or contaminationof the battery compartment and surrounding areamay result.Remove the used batteries from the remote controlpromptly.If you leave used batteries in the remote control foran extended period of time, it may cause liquidleaking, abnormal internal temperature rising orexplosion.If not using the projector for an extended period oftime, disconnect the power plug from the wall outletand remove the batteries from the remote control.If dust builds up on the power plug, the resultinghumidity may damage the insulation, which couldresult in fire.Keeping or leaving the remote control with batteriesinside may cause insulation deterioration, electricalleakage or explosion which could result in fire.Do not put your weight on this projector.You could fall or the projector could break, and injurymay result.Be especially careful not to let young children standor sit on the projector.Disconnect the power plug from the wall outlet as asafety precaution before carrying out any cleaning.Electric shocks can result if this is not done.If the lamp has broken, ventilate the roomimmediately. Do not touch or bring your face closeto the broken pieces.Failure to observe this may cause the user to absorbthe gas which was released when the lamp broke andwhich contains nearly the same amount of mercuryas fluorescent lamps, and the broken pieces maycause injury.If you believe that you have absorbed the gas or thatthe gas has got into your eyes or mouth, seekmedical advice immediately.Ask your dealer about the replacement of the lampunit and check the inside of the projector.Ask an Authorized Service Center to clean inside theprojector at least once a year.If dust is left to build up inside the projector withoutbeing cleaned out, it can result in fire or problemswith operation.It is a good idea to clean the inside of the projectorbefore the season for humid weather arrives. Askyour nearest Authorized Service Center to clean theprojector when required. Please discuss with theAuthorized Service Center regarding cleaning costs.We are constantly making efforts to preserve and maintain a clean environment. Please take non repairableunits back to your dealer or a recycling company.Do not subject the projector to excessive vibrationor shocks.The projector lens needs to be handled with care.Cover the lens with the lens cover when transportingthe projector.When transporting the projector, hold the body atthe bottom securely.Do not hold the front leg adjusters or the top cover tomove the projector, as this may damage theprojector.Cautions when transporting