Panasonic AG-CPD15P Operating Instructions Manual

Also see for AG-CPD15P: Operating instructions

Panasonic AG-CPD15P Operating Instructions Manual Manual pdf 12 page image

IN CAR MICCAMERA 1CONTROL PANELGPIO/SERIALUSBGPS-ANT.(OPTION)CAMERA 2AUDIO INVIDEO OUTAUDIO OUT12Control Reference Guide (continued)Rear panel (2)GPS-ANT. (OPTION) connectorWhen the separately sold GPSmodule is installed, insert the cablefrom the GPS antenna (attachedto the GPS module). During GPSreception, the signals received willregularly and automatically set therecorder clock to GPS time.LAN connectorConnect a LAN cable (included in theseparately sold Network Cable Kit).Note:For details on how to connect a PCor run PC applications, contact yoursupplier.USB connectorA commercially available USB memorydevice can be connected for use asexternal memory.Not all USB memory devices may berecognized.Notes:• To protect the [USB] port, connectthe USB extension cable (includedin the separately sold Cable Kit) tothe recorder before connecting acommercially available USB memorydevice .• A maximum of two USB memorydevices can be connected whenusing a commercially availableUSB hub.• Consult your supplier for help withconnection.GPIO/SERIAL connectorThis connector accepts up to eighttrigger signal inputs and providesone Rec Tally output and a serialport. Connect the trigger cable here(included in the separately soldCable Kit).DC IN connector( )This connector accepts power fromthe vehicle battery.Connect the power cable here(included in the separately soldCable Kit).Note:Do not pull out the power cablewhile the recorder is running.Turning the power off especiallyduring access (for example, duringrecording) may damage the P2 cardor corrupt file management data,setting information and other dataon the P2 card.Cable ClampUse this clamp to affix video, audio,camera cables and the power andUSB extension cables included inthe separately sold Cable Kit.