19 (E)ENGLISHRemote control unitRemote control unit settingsIn order to prevent mistakes made in operationsperformed using remote control when twocamera recorders are operated at the sametime, the operation buttons on the camerarecorder and accessory wireless remote controlunit can be set to work for “VCR1” applicationsand for “VCR2” applications.Setting methodOWireless remote control unitWhen the STOP ($) and STILL ADV (D)buttons among the VCR operation buttonsare pressed at the same time, the operationbuttons on the remote control unit are set tobe used for VCR1.Similarly, when the STOP ($) and STILL ADV(E) buttons among the VCR operationbuttons are pressed at the same time, theoperation buttons on the remote control unitare set to be used for VCR2.When the battery in the remote control unithas been replaced, the operation buttons areset to be used for VCR1.OCamera recorder bodySet VCR1 and VCR2 using the REMOTEitem on the setting menu OTHERFUNCTIONS screen. (See page 48)If the camera recorder body and remote controlunit settings are at variance, “REMOTE” in redletters lights up and is displayed in theviewfinder and on the LCD monitor.1 While pushing the knob in the direction of thearrow, pull out the holder.2 Insert the battery with the “+” marking faceup.3 Return the holder to its original position.Installing the batteryOWhen the battery (CR2025) has completelyrun down, replace it with a new one. (Thebattery life is about one year although itdepends on how often the remote control unitis used.) If the remote control unit isoperated near the camera recorder’s remotecontrol sensor and the camera recorder failsto operate, it means that the battery has rundown.OKeep batteries out of the reach of smallchildren. OSDCOUNTER RESET TITLESTILL ADV PAUSE STILL ADVINDEXSELECTSTOREOFF/ONP.B.DIGITALVAR.SEARCH– VOL +PB.ZOOMMENUSETITEMSTOP INDEXMULTI/P-IN-P REC A.DUBPLAYC/REW FF/ BZOOMDATE/TIME PHOTOSHOTSTART/STOPVCR 2 VCR 1