27 PreparationChanging backlight brightnessThe brightness of the LCD monitor backlight canbe adjusted between three different settings.1 Select LCD BL in the LCD item on thesettings menu SW MODE screen.LCD BL can be assigned with the LCD button.2 Press the LCD button.The brightness of the backlight can be switchedin the order of NORMAL→LOW→HIGH→NORMAL with each press of the button.LCDThis setting will remain saved even if thecamera’s power is switched off.The brightness can also be changed with theLCD BACKLIGHT item on the settings menuDISPLAY SETUP screen. (Page 94)••Reversing image displayViewing angles and video images can be verifiedby reversing the images displayed on the LCDmonitor horizontally or vertically.The recorded images will not be affected if theimages are reversed on the screen.1 Select LCD REV in the LCD item on thesettings menu SW MODE screen.LCD REV can be assigned with the LCDbutton.2 Press the LCD button.Press the button to switch between normaldisplay and reverse display.LCDIf the camera is switched off, images will bedisplayed as normal again when the camera isnext switched on.Screen displays other than images are alsoreversed. If the screen displays are notrequired, some of them can be cleared bypressing the DISP/MODE CHK button.During display reversal, the images duringREC CHECK and the playback images in thePB mode are also reversed.Images in the viewfinder will not be reversed.••••
