56Recharging the built-in batteryThe camera’s internal battery saves the date andtime.When LOW INTERNAL BATTERY (indicating thatthe internal battery has no remaining charge) isdisplayed even when the date and time are set,it means that the charge of the internal battery isdepleted. Do the following to recharge it.Reset the date and time when fully recharged.1 Connect the AC adapter. (Page 20)Leave the POWER switch at OFF.2 Leave the camera-recorder like this forabout 4 hours.The internal battery charges during this time.Check the time code and menu operationsafter recharging.If the date and time are not memorized afterrecharging, the internal battery requires changing.Please consult the place of purchase.Setting the time codeIn the setup menus, TC/UB SETUP screen, set thefollowing time code related items. (Page 92)TC MODETCGTC PRESET••••••Charging the built-in battery/Setting the time codeSpecifying the time code(TC PRESET)Set TC PRESET so you can record a value of yourchoice as the initial setting for the time code to beused at the start of recording.1 Set the POWER switch to ON.2 Select the TC PRESET item in the settingsmenu TC/UB SETUP screen.For menu operation (Page 82)Operations may also be performedusing buttons on the remote control thatcorrespond to those on the camera. Fordetails, see “Description of parts (Remotecontrol)”. (Page 18)3 Tilt the Operation lever in the direction tomove to YES, and push the Operation lever.••
