112Item Displaymode Description of settingsZEBRA DETECT 1P2 TAPE(Camera) Selects the brightness level of the left-leaning zebra patterns on the screen.50%, 55%, 60%, 65%, 70%, 75%, 80%, 85%, 90%, 95%, 100%, 105%ZEBRA DETECT 2P2 TAPE(Camera) Selects the brightness level of the right-leaning zebra patterns on the screen.50%, 55%, 60%, 65%, 70%, 75%, 80%, 85%, 90%, 95%, 100%, 105%, OFF• The zebra patterns do not appear if you select OFF.MARKERP2 TAPE(Camera) Select ON to display the marker. (Page 43)ON OFF• To display the marker, press the ZEBRA button.SAFETY ZONEP2 TAPE(Camera) Sets SAFETY ZONE to ON or OFF.OFF , 90%, 4:3VIDEO OUT OSDP2 TAPE(Camera)(MCR/VCR)Select ON to output the information displayed on the screen together with thesignals from the VIDEO IN/OUT jack.ON OFF• When a tape is used for recording, no on-screen displays (OSD) will be outputwhile recording is underway even when this function has been set to ON.However, OSD will be output to the 1394 output during recording standby. IfOSD is not required, set the function to OFF.• If this option is set to ON when performing backup recording while a tape isused, the OSD will be output to the 1394 output at all times except when theunit is in the recording mode.Bear in mind that the OSD may be recorded inadvertently if backup recordingis performed when a setting other than OFF is selected for the 1394CONTROL option (page 114) on the OTHER FUNCTIONS screen.DATE/TIMEP2 TAPE(Camera)(MCR/VCR)Sets whether to display the date and time on the screen and whether to outputfrom the VIDEO IN/OUT jack.OFF:The date and time are not displayed.TIME:The time is displayed.DATE:The date is displayed.TIME&DATE:The time and date are displayed.• If you select any setting other than OFF, the date and/or time are includedin the output signals regardless of the VIDEO OUT OSD setting. (The OFFsetting can be selected also using the remote control. (Page 75))LEVEL METERP2 TAPE(Camera)(MCR/VCR)Select ON to display the audio level meter.ON OFFindicates the factory setting.DISPLAY SETUP screenSetup menu list (continued)
