32Using SD memory cardsYou can use SD memory cards to save and loadSCENE fi les and USER fi les. (Page 56)Installing and removing the SDmemory cardInstallation1 Open the cover, and insert the card whilemaking sure it is oriented in the properdirection.LOCK2 Close the cover.Removal1 Open the cover, and check that the accesslamp is not lit.2 Press the card further into the unit, graspthe card, and then remove.3 Close the cover.Formatting SD memory card1 Switch the MEDIA switch to “P2”.2 Set the POWER switch to ON. (Page 20)3 Press the mode button and set it to MCRmode (the MCR/VCR lamp lights).4 Press the MENU button.5 On the menu, select OPERATION, FORMATand then SD CARD.• Select EXIT to cancel the formatting.6 Select YES on the confirmation screen.• The selected SD memory card is formatted.You can also format from the SD CARD FORMAToption on the CARD FUNCTIONS screen. (Page114)Cautions in using SD memory cards• SD memory cards used with the AG-HVX200should conform to SD standards. Be sure toformat cards using the AG-HVX200.To format SD memory cards using a personalcomputer, download the dedicated software fromthe support site.SD memory cards with the following capacity(8MB - 1GB) can be used for the AG-HVX200:For the latest information not available in theOperating Instructions, visit the P2 Support Deskat the following Web sites.https://eww.pavc.panasonic.co.jp/pro-av/• SD memory cards must not be used or stored inan environment where they may beExposed to high temperatures/humidities;Exposed to water droplets; orElectrically charged.• Be sure always close the cover when using anSD memory card.• You cannot use the SD memory card in the TAPEmode.TAPE8 MB 16 MB 32 MB 64 MB128 MB 256 MB 512 MB 1 GBAccess lamp
