Panasonic AGHPG10 - MEMORY CARD PORTABLE RECORDER Operating Instructions Manual

Also see for AGHPG10 - MEMORY CARD PORTABLE RECORDER: Operating instructions Brochure & specs

Contents

Panasonic AGHPG10 - MEMORY CARD PORTABLE RECORDER Operating Instructions Manual Manual pdf 59 page image

59 Saving dataCopying data from P2 cards to thehard drive• Use a hard drive with enough memory toaccommodate the data to be copied.• Proceed with copying after checking that the unithas a sufficient remaining battery charge.1 After inserting the copy source P2 card intothe unit’s P2 card slot, press [MENU], select“COPY TO HDD” using [STOP] and [PLAY],and press [STILL].COPY TO HDDFORMAT (HDD)PROPERTYSETUP• The data is copied onto the hard drive onecard at a time.2 Using [STOP] and [PLAY], select the cardslot, and press [STILL].Then select “YES” using [STOP], and press[STILL].Copying now begins.• To stop copying at any time, press [STILL].• The data of up to 15 cards can be stored onthe hard drive.COPY TO HDDFORMAT (HDD)PROPERTYSETUPSLOT1SLOT2EXITSURE?YESNOTo verify (inspect the two sets of data) aftercopying data onto a hard driveSwitch to the 1394 HOST mode, and select“SETUP” – “VERIFY” – “YES” using [STOP],[PLAY] and [STILL], and press [STILL].• The copying of the P2 card data will also beterminated if the process is aborted duringverification of the two sets of data.Hard drive status displaysYou can display the status of the hard drive whichis connected to the unit.1 Using [STOP] and [PLAY], select“PROPERTY”, and press [STILL].6123451. VENDER Name of vender2. MODEL Hard drive model name3. SIZE Total memory size of harddrive4. USED Amount of hard drivememory used (unit: GB) andarea of P2 card used (unit:cards)5. REMAIN Remaining hard drivememory (unit: GB)6. P2 cardinformationInformation (serial number,copy date) on P2 card whosedata has been copied2 Press [MENU] to complete the process.• You cannot copy data from a hard drive onto aP2 card.• Supply power from a source other than the 1394bus. (Power is not supplied from the unit itself.)• No guarantees for operation are given if the1394 HOST mode is established first withoutconnecting the hard drive (which supports 1394.a SBP2) and then the hard drive is connected.In a case like this, turn off the power, turn it backon, and release the 1394 HOST mode.• In the 1394 host mode, the clips in the partitionwill not be displayed as thumbnails.