106Chapter 7 Menu description tables (continued)The underlining in the variable range column indicates the setting in the presetmode.7-2-9 OPTION MODEItem Variablerange RemarksP.OFF GPS DATA HOLDCLEARFor selecting whether or not to hold theUMID GPS position information while thepower is off and record the information asthe data still held as the previous value untilanother measurement can be taken after thepower is next turned on.HOLD: The data is held and recorded.CLEAR: The data is cleared at the sametime as the power is turned off, andall zeros (no information) arerecorded from the time the power isturned on until the measurement isnext taken.REC TALLY REDGREENCHARFor selecting the method to access recordson the unit when the unit is connected toperipheral devices and used remotely.RED: The red tally lamp lights.GREEN: The green tally lamp lights.CHAR: For displaying “REC” in theviewfinder.C U FC U F1394 SPEED S200S400For setting the transfer rate of signals outputfrom the DVCPRO connector.S200: 200 MbpsS400: 400 MbpsC U F1394 IN CH 0:63AUTOFor setting the input channel of signals inputto the DVCPRO connector.0 – 63: To fix to the designated valueAUTO: To follow the settings of theexternally connected devicesC U F1394 OUT CH 0:63AUTOFor setting the input channel of signalsoutput from the DVCPRO connector.0 – 63: To fix to the designated valueAUTO: To follow the settings of theexternally connected devicesC U F1394 CONTROL OFFBOTHFor setting the control for recordingstart/stop operations of external devices thatare connected to the DVCPRO connector.OFF: Do not control the externallyconnected devices.BOTH: To control both the unit and theexternally connected devicesC U F1394 CMD SEL REC_PSTOPFor setting the control of recording stopoperations of the external devices that areconnected to the DVCPRO connector.REC_P: Operation to pause recordingSTOP: Stopping operationC U FSDI METADATA ONOFFFor setting metadata (UMID information) tooutput to the HD SDI signals.ON: To outputOFF: Not to outputC U FSDI EDH ONOFFFor setting that the detection signals of thecommunication error is output to the HD SDIsignals.ON: To outputOFF: Not to outputC U F