58Chapter 4 Adjustments and settings for recording (continued)4-8 Selection of video output signalsThe unit employs the VIDEO OUT connector and the MONOUT connector as connectors for outputting video signals.4-8-1 Settings of signals output fromVIDEO OUT connectorThe signal modes for outputting signals from the VIDEOOUT connector are switched with the VIDEO OUT switch.HD SDI: To output the HD SDI signalsSD SDI: To output the down-converted SD SDI signalsVBS: To output the down-converted composite videosignals.The signals output from the VIDEO OUT connector areswitched with the VIDEO OUT OUTPUT SEL switch.However, the switching operation is not acknowledgedduring the recording operation.VTR: In the recording or other EE mode, camera imagesare output from the connector; in playback mode,the VTR’s playback signals are output.CAM: The camera images are output at all times.Item Variablerange RemarksOUTPUT ITEM TCSTATUSMENUONLYSet the characters to be superimposed onthe output signals from the VIDEO OUTconnector.TC:Time codes are superimposed (when themenu is accessed, the menu screen issuperimposed.)STATUS:The characters that are the same as thecharacters superimposed in theviewfinder screen are superimposed.(When the menu is accessed, the menuscreen is superimposed.)MENU ONLY:The menu screen is superimposed onlywhen the menu is accessed. Thisnormally displays nothing.VIDEO OUT OUTPUT SEL switchSet the characters to be superimposed on the signals outputfrom the VIDEO OUT connector by using the VIDEO OUTCHARACTER switch and the OUTPUT ITEM item on themenu (page).VIDEO OUT CHARACTER switchVIDEO OUT switch
